Water Purification-Berkey Filters & Bucket Systems
Posted: Wed Dec 06, 2006 8:09 pm
The following is a home-made water filtering system made using (2) buckets, a Berkey Big Black water filter, and spout.
* Link Unavailable. This site is no longer active and available to view on line. But the info was good and we wanted to keep sharing it!
The credit for coming up with this idea goes to 'gilmore' on an old Preparedness forum.
Keep in mind that this filtering system will filter clean your water by about 99.9% BUT you SHOULD STILL USE CHLORINE TO GET RID OF ANY VIRUS THAT MAY BE IN YOUR WATER! Filter your water, using this system, first THEN use the chlorine purification as recommended by Dr. Woodson in a previous post.
For image see here: https://postimg.cc/18fqKtwz
2 - five gallon FOOD GRADE (#2 in a triangle is stamped on the bottom of the) buckets with lids. Drill a couple holes in them and you are up and running. . . I also "popped" for a spigot, so the pictures you will see are the "de luxe" model. Spigot not required, just a convenience.
The filters are can be cleaned with Scotchbrite cleaning pads. Each filter will last about 3000 gallons. Straining water before hand is recommended if you are using pond or puddle .water
~2 buckets, one will sit atop the other. . . A.K.A. (also known as) Lower Bucket and Upper Bucket
~The Lower bucket has a lid on it. That lid has a hole in it.
~The hole in the lid of the Lower bucket MUST match up with the hole in the bottom of the Upper bucket.
~This is because the the Upper bucket will have the filter in it and the filter (stem) is going to protrude (stick thru) the bottom of the Upper bucket and into the (lid) of Lower bucket.
The Upper buckets hole has been drilled to match the one in the lid of the Lower bucket.
~Insert the filter into the bottom of the Upper bucket.
~Tighten the filter with the onto the bottom of the Upper bucket with the wing nut like device that is on "stem" of the filter.
~This "stem" is what the purified water will drip thru.
~Place (gently) the Upper bucket onto of the lower bucket, making sure the stem fits into the lid of the lower bucket.
~Fill the Upper bucket with water and gravity does the rest
* Link Unavailable. This site is no longer active and available to view on line. But the info was good and we wanted to keep sharing it!
The credit for coming up with this idea goes to 'gilmore' on an old Preparedness forum.
Keep in mind that this filtering system will filter clean your water by about 99.9% BUT you SHOULD STILL USE CHLORINE TO GET RID OF ANY VIRUS THAT MAY BE IN YOUR WATER! Filter your water, using this system, first THEN use the chlorine purification as recommended by Dr. Woodson in a previous post.
For image see here: https://postimg.cc/18fqKtwz
2 - five gallon FOOD GRADE (#2 in a triangle is stamped on the bottom of the) buckets with lids. Drill a couple holes in them and you are up and running. . . I also "popped" for a spigot, so the pictures you will see are the "de luxe" model. Spigot not required, just a convenience.
The filters are can be cleaned with Scotchbrite cleaning pads. Each filter will last about 3000 gallons. Straining water before hand is recommended if you are using pond or puddle .water
~2 buckets, one will sit atop the other. . . A.K.A. (also known as) Lower Bucket and Upper Bucket
~The Lower bucket has a lid on it. That lid has a hole in it.
~The hole in the lid of the Lower bucket MUST match up with the hole in the bottom of the Upper bucket.
~This is because the the Upper bucket will have the filter in it and the filter (stem) is going to protrude (stick thru) the bottom of the Upper bucket and into the (lid) of Lower bucket.
The Upper buckets hole has been drilled to match the one in the lid of the Lower bucket.
~Insert the filter into the bottom of the Upper bucket.
~Tighten the filter with the onto the bottom of the Upper bucket with the wing nut like device that is on "stem" of the filter.
~This "stem" is what the purified water will drip thru.
~Place (gently) the Upper bucket onto of the lower bucket, making sure the stem fits into the lid of the lower bucket.
~Fill the Upper bucket with water and gravity does the rest